Rear Panel (Left Side) - Sony HKCA-700 Operation Manual

Rear Panel (left side)

1 POWER indicator
Lights up as follows to indicate the power supply
status:
Green: Power is being supplied to the camera.
Red: When the HDCU's CAMERA POWER switch
is set to OFF, or the CAM PW button of the
MSU-700 or RCP-700 is set to OFF.
Yellow: Power is being supplied to the camera, but
not to the viewfinder with the VF PW button of
the MSU-700 or RCP-700 set to OFF.
Off: Power is not being supplied to the camera.
1 POWER indicator
2 ND filter control
3 CC filter control
4 FILTER LOCAL button
5 FILTER LOCAL switch
6 SAFETY ZONE switch
7 DISPLAY switch
POWER
ND CC
2 3 B C
1 4 A D
CENTER
FILTER LOCAL
MARKER
VF SCAN
16:9 ON
4:3 OFF
SAFETY
ZONE
4:3 MARKER
ON
ON
OFF OFF
DISPLAY
ON
CANCEL ENTER
OFF
MENU
MENU SELECT
INCOM
1 2
PUSH
DC OUT
CAM ONLY
2 ND filter control
Used to select an ND filter when the FILTER LOCAL
button 4 is lit.
Position Selected Filter
1
Clear
2
1/4 ND
1/16 ND
3
4 1/64 ND
8 VF SCAN switch
9 CENTER MARKER switch
!º 4:3 MARKER control
!¡ 4:3 MARKER switch
!™ MENU SELECT control
!£ MENU SELECT switch
!¢ INCOM 1 connector
!∞ INCOM 2 connector
!§ DC OUT connector
7(E)