Panasonic LP-GS Series Operation Manual page 154

14 Bar code object
3. In the dialog, do any of the following:
•
•
4. If you want to optimize the parameters, confirm the "Optimal setting" dialog with "OK".
The optimal values for the parameters are determined. A dialog appears that shows a
list of parameters that will be optimized.
5. To close the dialog, select "OK".
Related topics
Set parameters for GS1 DataBar
154
For "Module width [mm]", you can input a new value.
Select "Details" to display the list of parameters that will automatically be optimized.
To return to the "Optimal setting" dialog, select "OK".
(page 152)
ME-NAVIS2-OP-1