Audio Control - Yamaha Revolabs FLX2 System Manual

Set Speed Dial
1. Browse to the Contacts menu: Menu  Contacts,
scroll to the desired contact, and selects the 'View'
key to access the contact.
2. The contact view screen shows the current name
and number. Pressing the 'Edit' key will open the
Edit Contact menu.
3. In the Edit Contact menu select 'Edit Speed Dial'.
4. Scroll to the desired speed dial number and press the
'Set' key.
5. If this speed dial number is already set, an overlay will
appear asking 'Overwrite Speed Dial X?'
Calling a Speed Dial Number
To call a speed dial number, from the dial menu or from the
home screen, press and hold the number key of the speed dial
contact you want to call until the screen changes, showing that
the FLX is dialing the number.
Pressing and holding a number key that has not yet been
assigned to a contact has no effect.

Audio Control

The following is a list of FLX Dialer menus that adjust the
system attributes related to speaker audio, Analog audio
inputs/outputs, telephony audio configurations, and muting
microphones.
Speaker Volume
1. Browse to the Speaker Volume menu: Menu 
Audio Controls  Speaker Volume.
2. The Speaker Volume screen is shown with graph
and numerical value of the current volume level.
3. Press the up and down buttons to increase or
decrease the volume.
4. During an active call or while in the home screen
you can also set the volume by pressing the up
and down buttons. In speaker mode or while in
the home screen the speaker volume is set from
this command. In handset mode the volume on the
Dialer is adjusted.
38