Installing Flx2 Components; Flx2 Base Station - Yamaha Revolabs FLX2 System Manual

Installing FLX2 Components

TM
The Revolabs FLX2 System is comprised of several components that work together to
provide you with a great wireless conferencing system. These components must be
setup correctly for optimal performance of the system.

FLX2 Base Station

The Base Station is the wireless receiver and sender of the audio stream from the
Microphones and to the Speaker, as well as to the Dialer. It features the ability to
connect two Revolabs FLX Microphones and one Speaker wirelessly.
The Base Station is designed to optimize audio and video conferencing by providing
consistent audio input from all participants.
The FLX2 POTS Base Station is shown in rear panel view below. It is equipped with a
telephone connection to connect to an analog telephone output, a DC power
connection, two mini-USB ports for firmware updates, and analog audio input/output
connections for video conferencing collaboration or for recording.
NOTE: The Base Station comes equipped with the necessary
cables and power supplies to perform an analog telephone
conference call. Other types of conference calls performed with
FLX2 may require additional cables that are not part of the
delivery.
12