Yamaha Electone EL-900 Owner's Manual page 91

Yamaha electrone el-900
Hide thumbs Also See for Electone EL-900:
Table of Contents

Advertisement

6
After numbers appear on the LED display of the M.D.R.,
begin playing.
Once the setup operation in step #5 is complete, a number
will appear on the LED display indicating that you can
begin recording your performance. The number also
indicates the amount of memory left on the disk.
If you make a mistake during recording:
1. Press the PLAY button while the M.D.R. is still running.
This stops the recording and returns you to the starting
point of the song.
The letters メrEモ (retry) appear on the left side of the LED
display and the PLAY and CUSTOM PLAY LEDs start
flashing, indicating that you can re-record the song.
2. Press PLAY again to begin re-recording the song.
Re-recording starts from the beginning of the song and
replaces the previously recorded performance with the
newly recorded performance.
7
When you finish playing, press the STOP button.
After the small bars flash to draw a square on the LED
display to indicate the processing for stop, both the
RECORD and PLAY lamps go out, and recording is
stopped.
8
To hear your newly recorded performance, press the PLAY
button.
Play back will begin after a couple of seconds. For more
information on playback and other playback-related
functions, see page 98.
RECORD
UPPER
LOWER
PEDAL
CONTROL
UPPER
LOWER
SONG
FROM
TO
REPEAT
SONG COPY
6 2 2
PAUSE
STOP
PLAY
SONG SELECT
TEMPO +
MUSIC DISK RECORDER
NOTE:
The short time it takes to set up for recording is recorded
as well, causing a short pause before playback of the song.
RECORD
PLAY
UPPER
LOWER
PEDAL
CONTROL
UPPER
LOWER
SONG
FROM
TO
SONG COPY
REPEAT
PAUSE
STOP
PLAY
SONG SELECT
TEMPO +
MUSIC DISK RECORDER
RECORD
UPPER
LOWER
PEDAL
CONTROL
UPPER
LOWER
SONG
FROM
TO
REPEAT
SONG COPY
PAUSE
STOP
PLAY
SONG SELECT
TEMPO +
MUSIC DISK RECORDER
Never eject the floppy disk before the STOP lamp lights
up.
NOTE:
When the available memory reaches メ008モ or less, the
numbers begin flashing to warn you. If this happens,
stop recording before the display reaches メ000.モ
Never attempt to press the eject button or turn the
power off during recording, reading and playing
back. Doing so can damage the disk and possibly
the disk drive. Be sure to remove the floppy disk
from the disk drive before turning off the power.
PLAY
PEDAL
CONTROL
SHIFT
SONG DEL.
RECORD
CUSTOM PLAY
FORMAT
PEDAL
CONTROL
SHIFT
SONG DEL.
RECORD
CUSTOM PLAY
FORMAT
PLAY
PEDAL
CONTROL
SHIFT
SONG DEL.
RECORD
CUSTOM PLAY
FORMAT
91
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents