Yamaha Electone EL-900 Owner's Manual page 165

Send the Registration Data from your PC to the EL-
900 and Change the Registration Memory Buttons
･ Receiving the Registration Data
1
Send the Request-to-Receive all RAM message, ﾒF0, 43, 70, 70, 20,
F7ﾓ (Hexadecimal), from the sequencing software (PC) to the EL-
900.
Once the EL-900 receive the Request-to-Receive all RAM message,
the EL-900 automatically receives all registration data and relocates
them to the all registration numbers.
･ Selecting the Registration Memory Buttons
Sending the Program Change messages from the PC to your EL-900 makes it
possible to change the registration on the EL-900.
2
Send the Program Change message, ﾒCF, 00ﾓ (Hexadecimal) to the
EL-900.
Once the Program Change message is received, the EL-900
automatically turns the Registration Memory button 1 on.
･ Sending the Note-On Messages
3
Send the Note-On message, ﾒ90, 30, 7Fﾓ (Hexadecimal) to the EL-
900.
The EL-900 receives the Note-On message and plays the C2 key on
the Upper Keyboard using the Strings 1 you have selected on the
previous page.
All the above operations can also be done with the M.D.R. easily and
efficiently. However, using the PC/ hard disk allows you to build up
a large data library a single disk cannot deal with.
14
165