Yamaha Electone EL-900 Owner's Manual page 58

VOICE EFFECT
DISPLAY
FOOT REGIST.
SW.
4
VOICE
EDIT PATTERN SEQUENCE
U. FLUTE L. FLUTE
VOICE
DISPLAY SELECT
58
2) Setting the Tremolo effect
Tremolo setting made here are global; in other words , they are applied the
same to all voices for which Tremolo has been turned on (set to standby).
To turn on the Tremolo effect and call up the Tremolo Control page:
A. B. C.
SET M. O. C.
Press the TREMOLO (FAST) button in the DISPLAY SELECT section.
The lamp of the button lights up to indicate that Tremolo is on. Press the
button again to turn Tremolo off and Chorus on (the LED turns off).
EXP.
SHIFT PITCH/MIDI
RHYTHM
PROGRAM
TREMOLO
VOICE (FAST)
3) Realtime control of Tremolo effect
Once the Tremolo effect has been turned on and set, you can control the
effect in real time from the panel or from the Left Footswitch.
Panel Control
Simply press the TREMOLO (FAST) button in the DISPLAY SELECT section
to turn the Tremolo effects on and off while you're playing.
This button functions just like the fast/slow switch on an actual rotating speaker
cabinet. When Tremolo is on, the rotation effect is fast; when off (Chorus), it
is slow. The speed change is gradual, effectively simulating the slowing down
and speeding up of a rotating speaker.
Footswitch Control
You can also use the Left Footswitch to control the Tremolo effect in the same
way, if the Footswitch has been properly assigned. (See the section Footswitch
Assign on page 151 for details.)
TREMOLO CONTROL Page
1 TREM. SPEED (Tremolo Speed)
Determines the speed of the Tremolo (rapid rotation) effect. Range:
4.75Hz - 7.77Hz
2 CHOR. MODE (Chorus Mode)
Determines the effect applied when Tremolo is switched off: a slow
chorus effect (SLOW) or STOP. Use the SLOW setting when you
want to have a constant rotating speaker sound.
1 2