Quitting Rhythm Pattern Program - Yamaha Electone EL-900 Owner's Manual

3
(If necessary) Press the Data Control buttons below [Edit Name] to
give a name to the rhythm you have created.
The method to edit the name is the same as the one for the song
name in the M.D.R. section, See page 92 for more information. Up
to 10 characters can be used in this case.
4
Select [Save] to save the rhythm or [Cancel] to abort the operation
and return to the previous display.
When the pattern has been saved, the message ﾒCompleted!!ﾓ
momentarily appears.
When the pattern cannot be saved because of lack of available memory
space, the following display appears.
You should periodically save your rhythm as you are making it and
check the amount of remaining memory. If the rhythm currently
being edited cannot be saved because of a lack of memory space,
erase some of the less necessary percussion sounds with the Clear
function, and try saving the pattern again.
11) Quitting the Rhythm Pattern Program
You can quit the Rhythm Pattern Program from any of its display pages.
To do this:
1
Press the PATTERN button in the DISPLAY SELECT section once
again.
If a rhythm is playing, it will automatically be stopped. The following
display will appear, prompting confirmation of the operation.
2
Select [Exit] to leave the Rhythm Pattern Program, or [Cancel] to
abort the operation and return to the previous display.
NOTE:
The Power On Reset function (page 85)
can be to delete all User rhythms from
memory.
NOTE:
If you leave the Rhythm Pattern Program
without having edited any patterns, this
display will not appear.
9
141