Table of Contents
Advertisement
Grease filters and edge
extraction panel
Fire hazard!
Oversaturated grease filters are a fire
hazard.
Clean the grease filters at regular
intervals.
The edge extraction panel and the re-
usable metal grease filters in the
appliance remove solid particles
(grease, dust, etc.) from the kitchen
vapours, preventing soiling of the
rangehood.
The grease filters and the panel must be
cleaned at regular intervals.
Heavily soiled grease filters hinder air
extraction and will lead to increased
levels of soiling in the rangehood and
in the kitchen.
Grease filter cleaning intervals
Grease which has collected in the
rangehood hardens over time and
makes cleaning more difficult. It is
therefore recommended that the edge
extraction panel and the grease filters
should be cleaned regularly (at least
every 3–4 weeks) to avoid a build-up of
grease.
The operating hours counter reminds
you to clean the edge extraction panel
and the grease filters regularly via the
grease filter symbol which will light
up.
Cleaning and care
Removing the panel and grease
filters
Opening the panel
With the deflector plate retracted,
touch the On/Off sensor .
Touch the lighting control briefly.
The deflector plate extends.
Risk of crushing!
If you switch off the fan and the
lighting when the deflector plate is
extended, the deflector plate will
automatically retract after 1 minute.
Risk of injury. Risk of damage to the
opened panel.
To prevent the deflector plate from
retracting, leave the lighting switched
on.
The panel is held in place by magnets.
Pull the top of the panel forwards and
swing it open.
35
Advertisement
Table of Contents
