Table of Contents
Advertisement
Signing out of Wi-Fi (reset to factory
settings)
To set up a new Wi-Fi connection, the
existing Wi-Fi connection must first be
disconnected.
With the deflector plate retracted,
touch the On/Off sensor .
All symbols light up with reduced
brightness.
Press and hold the run-on option
control until the grease filter
and charcoal filter symbols light
up.
Touch the 1 control.
The deflector plate extends.
With an existing Wi-Fi connection 2 and
3 will light up constantly.
The rangehood is ready for
disconnection during the next two
minutes.
Before using for the first time
Touch the 1 control.
2 will light up constantly, 3 will flash on
and off.
After a few seconds 2 and 3 will flash
on and off. The connection has now
been disconnected.
Quit disconnection mode on the
rangehood by touching the run-on
control .
The Wi-Fi connection has been
disconnected. A new connection can
now be set up.
21
Advertisement
Table of Contents
