Canon CXDI-31 Service Manual page 62

9) Select a name for the shortcut appears. Type ccrstart.bat. Click Finish.
10) Close the Taskbar Properties window, and login again to Windows NT.
Start Shut Down Windows NT
11) After restarting the computer, make sure that the CXDI application starts up.
(4) Changing the window size
1) With the CXDI application open in step 11) above, use the keyboard to enter debugging
mode. (Use [Alt] + [Tab].)
2) The command prompt screen is displayed. Click the icon at the top left.
3) A drop-down menu is displayed. Select Properties from this menu. [Fig 1]
4) The screen displays "Ccrstart.bat "Properties. Click the Font tab, and then change Size
to 7x12.
5) Click the Layout tab, change Height for the Screen Buffer Size to 5000, and then click
[OK].
6) The screen displays Apply Properties to Shortcut. Add a checkmark to Modify shortcut
which started this window, and then click [OK].
2 Installation Manual
Close all programs and log off.
[Fig 1]
- 36 -