Notes On Installing The Rear Cover - Canon CXDI-31 Service Manual

3. CXDI-31 Imaging Unit

3.1.3. Notes on installing the rear cover

To avoid from pinching the power cable by the rear cover, the adhesive tape and the fixing
method have been changed. Once removing the rear cover, make sure to change the fixing
method as follows. Also, ensure the power cable is not pinched when installing the rear cover.
(1) Tape to be used
Prepare the tape listed below.
Manufacturer name Product name Product number Remark
Nittou Denko Acetate Adhesive Tape No.156A Black
URL: http://www.nitto.com/product/datasheet/e_parts/044/
(2) Changing the power cable fixing method
The previous way of fixing the cable (The factory shipment state)
2 3
1
4
The modified way of fixing the cable
3
2
4
1
5
*The numbers from 1 to 5 above indicate the tape application order described in the next section
"(3) Power cable fixing method).
- 7 -