Canon CXDI-31 Service Manual page 101

send_image error return values and log output (reference)
Example of error Return value and log output
Successful Return value: 0x00
No log output at this time
Invalid parameter Return value: 0x00000001
exists. CXDI interpretation:
See below for the log output at this time:
-------------------------------------------------------------------------------------
-------------------------------------------------------------------------------------
Server fails to Return value: 0x00180012
start. CXDI interpretation:
See below for the log output at this time:
-------------------------------------------------------------------------------------
18-132600[127]ERR:
18-132600[127]ERR:
18-132600[127]ERR:
-------------------------------------------------------------------------------------
As a result of Return value: 0x10
providing the CXDI interpretation: DICOM response error (CCRTRANS_ERR_RESP)
server with a See below for the log output at this time:
command -------------------------------------------------------------------------------------
request, an error
was returned as -------------------------------------------------------------------------------------
response.
As a result of Return value: 0x18
providing the CXDI interpretation:
server with a
command The transmission processing was successful but a warning was returned
request, a from the server.
warning was See below for the log output at this time:
returned as -------------------------------------------------------------------------------------
response.
-------------------------------------------------------------------------------------
Other errors Return value: other than above
CXDI interpretation:
The log output is many and varied. It depends on the error. One example
is shown below.
-------------------------------------------------------------------------------------
18-140933[d2]ERR:
18-140933[d2]ERR:
18-140933[d2]ERR:
-------------------------------------------------------------------------------------
2 Installation Manual
DICOM connect error
(CCRTRANS_ERR_DICOMPARAM)
-t Set called AE title to title in Association RQ
-v Place DUL and SRV facilities in verbose mode
node Node name for network connection
port TCP / IP port number of server application
image A list of one or more images to send
DICOM connection error
(CCRTRANS_ERR_NOT_CONNECT)
60012 TCP Initialization Error: Invalid argument
130012 Peer aborted Association (or never
connected)
180012 Failed to establish association
DICOM response warning
(CCRTRANS_WRN_RESP)
DICOM communication error
(CCRTRANS_ERR_DICOM_TRANSE)
c0082 SRV Send (DATA SET) failed in
SRV_SendDataSet
190082 SRV Request failed in
SRV_NCreateRequest
70012 NULL key passed to routine:
DUL_ReleaseAssociation
- 75 -
(To be determined)
(To be determined)