Miele ProLine CS 1018 G Operating And Installation Instructions page 9

Technical safety

Unauthorised installation, maintenance and repairs can cause
considerable danger for the user. Installation, maintenance and
repairs must only be carried out by a Miele authorised technician.

Damage to the wok can compromise your safety. Check the wok
for visible signs of damage. Do not use a damaged wok.

Temporary or permanent operation on an autonomous power
supply system or a power supply system that is not synchronised
with the mains power supply (e.g. island networks, back-up systems)
is possible. A prerequisite for operation is that the power supply
system complies with the specifications of EN 50160 or an
equivalent standard.
The function and operation of the protective measures provided in
the domestic electrical installation and in this Miele product must
also be maintained in isolated operation or in operation that is not
synchronised with the mains power supply, or these measures must
be replaced by equivalent measures in the installation. As described,
for example, in the current version of BS OHSAS 18001–2 ISO
45001.

The electrical safety of this wok can only be guaranteed when
correctly earthed. It is essential that this standard safety requirement
is met. If in any doubt please have the electrical installation tested by
a registered electrical worker.

To avoid the risk of damage to the wok, make sure that the
connection data on the data plate (voltage and frequency) match the
mains electricity supply before connecting it to the mains. Consult a
registered electrical worker if in doubt.

Do not connect the wok to the mains electricity supply by a multi-
socket unit or an extension lead. These do not guarantee the
required safety of the appliance (fire hazard).

For safety reasons, this wok may only be used after it has been
built in.
Warning and Safety instructions
9