Miele ProLine CS 1018 G Operating And Installation Instructions page 57

Changing the inner burner main jet
d Small jet plate (main jet for inner
burner)
e Air intake sleeve
f Air opening
 Use an open spanner (SW 8) to rotate
the screw  out of the screw part .
Use another open spanner (SW 12)
for support while you are doing this.
 Use an open spanner (SW 12) to
rotate the screw part  out of
part . Use another open spanner
(SW 12) for support while you are
doing this.
 Remove the small jet plate  from
the part  and insert the new small
jet plate (see jet table).
 Adjust the two air openings  by
moving the air intake sleeve  so
that a distance of 2 mm remains.
 Tighten all the parts in reverse order
and check for leaks.
Converting to another gas type
Changing the small jets
a Small jet with smaller diameter
(e.g. for liquid gas: 0.23)
b Small jet with larger diameter
(e.g. for liquid gas: 0.60)
 Using a small screwdriver, unscrew
the two small jets in the gas fitting.
 Pull out the jets with a pair of pointed
pliers.
 Fit the correct jets securely (see jet
table).
 Secure the jets against inadvertent
loosening with sealing wax.
57