Miele ProLine CS 1018 G Operating And Installation Instructions page 49

Connecting the ProLine element
 Connect the ProLine element/
elements to the electricity supply and
to the gas supply (see "Installation –
Electrical connection" and "Gas
connection").
Functional check
 After installing the hob, ignite all
burners to check that they are
operating correctly:
- The gas flame must not go out on the
lowest setting, or when the rotary
control is turned quickly from the
highest to the lowest setting.
- On the highest setting, the gas flame
must have a distinctive and visible
core.
Removing a ProLine element
 If the ProLine element is accessible
from below, push it upwards to
remove it. Push the back of the
appliance out first.
 If the ProLine element is not
accessible from below, take hold of
the appliance with both hands at the
back, pull it forwards, then lift it up
and out.
Installation
49