Dust' Relay Output For Dust Value (With Fda241 Only); Fault' Relay Output For Error Messages; Inspect' Relay Output For Early Warning (Fda241 Only) - Siemens FDA241 Mounting & Installation

4.5
4.6
4.7
Building Technologies
Fire Safety

'Dust' relay output for dust value (with FDA241 only)

Relay output for external monitoring of the dust value.
Connection: n.o.
Properties
Suitable for external monitoring of the dust value.

Is activated with increased dust concentration.


'Fault' relay output for error messages

Relay output for error messages.
State
Normal (no error)
Error or disconnected from the power supply Open
Connection: n.c. (default setting)
Properties
The relay deactivates if an error occurs.

'Inspect' relay output for early warning
(with FDA241 only)
Relay output for early warning.
Connection: n.o. (default setting) and resistance according to specification of the
connected device.
Properties
Activation occurs according to the chosen setting.

The connection can be changed to 'n.c.' with the 'FXS2051 ASD Configuration

Tool' software. The chosen setting applies automatically to 'Inspect', 'Prealarm',
'Fire 1', 'Fire 2'.
firealarmresources.com
'Dust' relay output for dust value (with FDA241 only)
Relay
Closed
Installation
4
27
A6V10345654_h_en_--
2015-05-29