2-2-9. Removal of PS-526 Board/AC Inlet/AC
Outlet (UC model only)
1. Remove the cover ass'y. (Refer to section 2-1-1.)
2. Remove the rear panel block. (Refer to section 2-1-2.)
3. Remove two screws (B3x6).
4. Unsolder AC outlet (UC model only) and AC inlet on
PS-526 board.
5. Remove one screw (PWH3x6) and then remove
PS-526 board.
6. Unlock two claws (left/right) and then unlock four
claws (upper/lower).
And remove AC outlet in the direction of arrow.
claw (right)
AC outlet
claw (lower)
PS-526
board
screw
(PWH3x6)
2-8 (E)
claw (upper)
claw (left)
AC outlet (for UC)
screw
(B3x6)
AC inlet
2-2-10. Removal of VSW-60 Board
1. Remove the cover ass'y. (Refer to section 2-1-1.)
2. Remove the rear panel block. (Refer to section 2-1-2.)
3. Remove eight screws (BVTP3x8).
4. Remove four screws (PWH3x6) and then remove
VSW-60 board.
screw
(BVTP3x8)
VSW-60 board
screw
(PWH3x6)
screw
(PWH3x6)
screw
(BVTP3x8)
screw
(BVTP3x8)
VID-P110