Removal Of Ksw-40 Board; Removal Of Push Switch (Zoom) - Sony VID-P110 Service Manual

2-2-3. Removal of KSW-40 Board

NOTE : Removal/installation of flexible card wire 16P
flexible card wire is used on between KSW-40
board and SY-248 board.
When handling a flexible card wire, be very
careful not to bend it because this will makedly
reduce its life.
1. Remove the cover ass'y. (Refer to section 2-1-1.)
2. Remove the table ass'y. (Refer to section 2-1-2.)
3. Disconnect one flexible card wire from CN1 and one
connector (CN3) on KSW-40 board, and then remove
KSW-40 board.
CN1
CN1
KSW-40 board
VID-P110
Flexible
card wire
Flexible
card wire
CN3

2-2-4. Removal of Push Switch (Zoom)

NOTE : Removal/installation of flexible card wire 5P
flexible card wire is used on between KSW-40
board and the push switch.
When handling a flexible card wire, be very
careful not to bend it because this will makedly
reduce its life.
1. Remove the cover ass'y. (Refer to section 2-1-1.)
2. Remove the table ass'y. (Refer to section 2-1-2.)
3. Remove the KSW-40 board. (Refer to section 2-2-3.)
4. Disconnect one flexible card wire from CN2 on KSW-
40 board.
5. Remove two screws (PS2x8) and then remove push
switch (zoom).
KSW-40 board
Push switch
(Zoom)
CN2
screw
(PS2x8)
screw
(PS2x8)
Flexible
card wire
CN2
nut (M2)
Flexible
card wire
2-5 (E)