2-1-2. Removal of Table Ass'y and Rear Panel Block
Table Ass'y
1. Remove the cover ass'y. (Refer to section 2-1-1.)
2. Remove seven screws "a" (PTP4x12) and two screws
"b" (PTP3x10).
3. Move light ass'y L/R and arm to the position in figure.
4. Remove table ass'y in the direction of arrow.
2-2 (E)
Light ass'y L
screw "a"
(PTP4x12)
Rear Panel Block
1. Remove the cover ass'y. (Refer to section 2-1-1.)
2. Disconnect four connectors (CN1, CN2, CN3, CN501)
on VSW-60 board and one connector (CN3) on PS-526
board.
3. Remove two screws "c" (B3x10), one screw "d"
(B3x6) and two hexagonal screws and then remove
rear panel block.
screw "b"
(PTP3x10)
Table ass'y
CN2
Rear panel
block
Arm
VSW-60
board
screw "a"
(PTP4x12)
hexagonal
screw "c"
screw
CN1
(B3x10)
CN3
CN501
CN3
screw "d"
(B3x6)
screw "c"
(B3x10)
PS-526
board
Light ass'y R
VID-P110