2-2-5. Removal of MA-87 Board
1. Remove the cover ass'y. (Refer to section 2-1-1.)
2. Remove the table ass'y. (Refer to section 2-1-2.)
3. Disconnect one connector (CN801) on MA-87 board.
4. Remove three screws (BVTP3x8) and then remve
MA-87 board.
screw (BVTP3x8)
MA-87 board
2-6 (E)
CN801
2-2-6. Removal of SY-248 Board
1. Remove the cover ass'y. (Refer to section 2-1-1.)
2. Remove the table ass'y and the rear panel block.
(Refer to section 2-1-2.)
3. Disconnect one flexible card wire from CN10 on
SY-248 board.
4. Disconnect three connectors (CN5, CN7, CN8) on
SY-248 board.
5. Remove four screws (BVTP3x8) and then remove
SY-248 board.
screw
(BVTP3x8)
screw
(BVTP3x8)
CN10
CN7
CN5
Flexible
card wire
SY-248 board
CN8
VID-P110