Nokia IP1220 Installation Manual page 55

12. From the top of the PMC carrier, screw the NIC retaining screws into the standoffs on the
back of the NIC.
13. From the underside of the PMC carrier, screw in the bezel retaining screws.
14. Insert the PMC carrier or ADP module back into its original slot on the front of the IP1200
Series appliance until it clicks into place.
15. Press both levers to make sure that they are locked into place and power is restored to the
card carrier.
IP1220 and IP1260 Security Platforms Installation Guide
All manuals and user guides at all-guides.com
Removing, Installing, and Replacing NICs or the ADP Module
00312
00311
55