Product Overview; Controls - Toro Reelmaster 5610 Operator's Manual

Product Overview

Figure 41
1. Engine hood
2. Seat
3. Control arm
4. Steering wheel

Controls

Seat-Adjusting Knobs
The seat-adjusting lever
adjust the seat forward and rearward. The weight
adjusting knob adjusts the seat for your weight. The
weight gauge indicates when the seat is adjusted to
your weight. The height-adjusting knob adjusts the
seat for your height.
Figure 42
1. Weight gauge
2. Weight-adjusting knob
5. Seat adjustments
6. Front cutting units
7. Rear cutting units
(Figure 42) allows you to
3. Height-adjusting knob
4. Adjusting lever (forward
and rearward)
Traction Pedal
The traction pedal
reverse operation. Press the top of the pedal to move
forward and the bottom to move rearward. Ground
speed depends on how far you press the pedal. For
no load, maximum ground speed, fully press the pedal
while the throttle is in the F
To stop, reduce foot pressure on the traction pedal
and allow it to return to the center position.
Mow-Speed Limiter
When the mow-speed limiter
up, it controls the mow speed and allows the cutting
units to be engaged. Each spacer adjusts the mowing
speed by ½ mile per hour. The more spacers you
g216864
have on the top of the bolt, the slower you will go. For
transport, flip back the mow-speed limiter and you will
have maximum transport speed.
Brake Pedal
Press the brake pedal
Parking Brake
To engage the parking brake,
the brake pedal and press the top forward to latch. To
release the parking brake, press the brake pedal until
the parking brake latch retracts.
g003954
1. Traction pedal
2. Mow-speed limiter
3. Spacers
24
(Figure 43) controls the forward and
position.
AST
(Figure 43) is flipped
(Figure 43) to stop the machine.
(Figure 43) push down
Figure 43
4. Brake pedal
5. Parking brake
6. Tilt-steering pedal
g003955