Table of Contents
Advertisement
8. Attachment of fan bracket
(1) Put the fan bracket in the direction of the
arrow, while holding the harness 1 with fan
bracket as shown in Fig A.
(2) Fix the fan bracket with three screws.
(3) Connect the harnesses 1 to the CN1 and 2
to the CN101 on the IF-715 board.
(4) Bundle the harnesses 1 and 2 in the
clampers 1 and 2 as shown in the figure.
9. Attachment of upper lid
Refer to Section 1-6.
BKNW-116
Harness1
Harness1
PWH3 x 5
Harness2
IF-715 board
PWH3 x 5
SW cover
CN1
How to bundle harnesses
Harness2 of
power-cooling-fan
2-3. Replacement of Power Supply Unit
Harness2
Fan bracket
PWH3 x 5
Clamper1
Fan bracket
Clampers2
CN101
IF-715 board
Clampers
Power-cooling-fan
Harness1 of
power supply unit
2-25 (E)
Advertisement
Table of Contents
