2-2-3. Removal/Installation of Hard Disk Drive
Outline
1. Removal of HDD unit
2. Removal of hard disk drive
3. Removal of CN-1667/1668 boards
4. Attachment of CN-1667/1668 boards
5. Attachment of hard disk drive
6. Installation of HDD unit
Tools
. Torque driver's bit (+3mm, l = 90mm):
. HDD cushion:
. Shockless torque screwdriver 1.2 N.m {12kgf.cm}: J-6530-070-A
Notes
. Carry out the all work mentioned in this section on HDD cushion.
. Carry out the all work mentioned in this section using shockless torque screwdriv-
er. Never use the former ratchet type torque driver.
Preparation
1. Turn off the power and wait for more than 30 seconds.
Removal
1. Removal of HDD unit
Refer to procedure 1 to 3 in Section 2-2-2.
BKNW-116
J-6323-430-A
J-6530-060-A
2-2. Replacement of Hard Disk Drive
2-9 (E)