2-2. Replacement of Hard Disk Drive
Outline
1. Removal of upper lid
2. Removal of bracket
3. Removal of HDD unit
4. Replacement of hard disk drive
5. Installation of HDD unit
6. Attachment of bracket
7. Attachment of upper lid
Tools
. Torque screwdriver's bit (+3mm, l = 90mm):
. HDD cushion:
. Shockless torque screwdriver 1.2 N.m {12kgf.cm}: J-6530-070-A
Preparation
1. Turn off the power and wait for more than 30 seconds.
c
Turn off the power and wait till a heat up device cools when replacing HDDs or its
peripheral parts.
Removal
1. Removal of upper lid
Refer to Section 1-6.
2. Removal of bracket
(1) Unscrew the four screws and remove the
bracket.
2-4 (E)
J-6323-430-A
J-6530-060-A
PWH3 x 5
Bracket
PWH3 x 5
BKNW-116