Table of Contents
Advertisement
2-2. Replacement of Hard Disk Drive
(6) Bundle the SCSI cable and harness with wire
holders.
n
Bundling method varies according to each
HDD unit. Refer to the figure and gather
properly.
6. Attachment of bracket
(1) Fix the bracket with the four screws.
n
Insert the bracket in the hole of the chassis
and fix it.
7. Attachment of upper lid
Refer to Section 1-6.
2-8 (E)
HDD unit 1
To IF-715 board
HDD unit 2
To HDD unit 3
HDD unit 3
To HDD unit 2
HDD unit 4
To IF-715 board
To SCSI connector
To IF-715 board
To HDD unit 2
To HDD unit 4
To IF-715 board
To IF-715 board
To SCSI connector
To HDD unit 1
BKNW-116
Advertisement
Table of Contents
