Making Adjustments; Adjusting The Position Of The Paper Deflecting Plate Solenoid (Sl3) - Canon DADF-G1 Service Manual

3.9.2 Making Adjustments

1) Secure the solenoid [1] in position
where the stopper [3] (rubber block)
comes into firm contact with the rear
end of the stopper plate [2] when the
plunger of the solenoid [1] is at the end
of its end.
3.10 Adjusting the Position of the Paper Deflecting Plate Sole-
noid (SL3)
1) Remove the main cover.
2) Loosen the fixing screw [1], and secure
the solenoid [2] in position where its
stroke is 4.5 mm.
COPYRIGHT© 2000 CANON INC. CANON DADF-G1 REV.0 OCT. 2000
CHAPTER 3 MECHANICAL SYSTEMS
[2]
[3]
F03-309-03
4.5mm
F03-310-01
[1]
[1]
[2]
3-41