Canon DADF-G1 Service Manual page 107

CHAPTER 4 MAINTENANCE AND INSPECTION
3 Scheduled Servicing
Do not use solvents or lubricants other than those specified.
Ref. Parts name
1 Delivery/reversing roller
2 Registration roller
3 Registration paper sensor (S3)
4 Separation belt (pickup assembly)
5 Separation flapper (rear, front)
6 Feed roller (pickup assembly)
7 Original tray paper sensor (S1)
8 Delivery roller
9 Pickup roller (pickup assembly)
10 Feed belt
11 Copyboard glass
12 Separation front guide
13 Vertical size plate
14 Feed belt retaining roll spring
4-2
: Clean : Replace : Lubricate : Adjust
Scheduled servicing
every 100,000every 200,000
T04-300-01
COPYRIGHT© 2000 CANON INC.
: Inspect
Remarks
Or 6 months, whichever is
earlier.
Or 6 months, whichever is
earlier.
Upon replacement of feed
belt
Apply lubricant where the
spring comes into contact
with the feed belt retaining
roll.
CANON DADF-G1 REV.0 OCT. 2000