Deactivating Automatic Tape Recorder Start - Siemens HiPath 4000 Operating Instructions Manual

Tape recorder
Step by Step
PROG
LINE 1
or
LINE 2
TAPE
60
Press 1.
The LED test is performed.
Press 0.
The test menu disappears.
Plug in the handset or the headset. The tape recorder is automatically
activated every time a trunk call is received.

Deactivating automatic tape recorder start

Prerequisite: the handset or the headset is unplugged:
Press Program menu.
The test menu appears.
LINE 1
Press LINE 2
(depending on the configuration of the communications system).
Press TAPE.
Press 0.
The test menu disappears.
Plug in the handset or the headset.
The automatic tape recorder start is deactivated.
The automatic tape recorder start setting is lost and must be
reprogrammed if the connection to communications system is
interrupted (e.g. power failure at attendant terminal).