Searching For A Party (Paging) - Siemens HiPath 4000 Operating Instructions Manual

Searching for a party (paging)

Step by Step
Searching for a party (paging)
You can use the paging system to search for an absent party.
Prerequisite: a paging system is set up in the communications sys-
tem.
Call setup.
DIAL
or
Press Personal call.
PER
Press PAGE.
PAGE
Dial the station or paging number.
The message CONNECTED (paging is initiated) or
CURRENTLY BLOCKED (paging busy) or
NOT POSSIBLE (paging unavailable) appears on the
left in line 9.
Paging commences. Wait for the paged party to report in.
If the paged party does not report in or if the paging system deacti-
vates after a predetermined timeout, you can terminate the paging ac-
RLS
tion by pressing Connection release.
The paging operation ends.
57