Programming Repertory Keys; Or Trunk Group Keys; Interrogating All Stored Destinations - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
Line 1 Line 2 Line 3 Line 4 Line 5
Name Name Name Name Name
Name Name Name Name Name
Name Name Name Name Name
Name Name Name Name Name
Repertory keys
PROG
Programming repertory keys or trunk
group keys
Up to 42 numbers with a maximum of 22 digits (including trunk group
code) or individual trunk group codes (tie trunks) can be stored under
repertory keys or the trunk group keys
External route 1
External route 2
Each repertory key has a memory line on a specific memory page.
The assignment of the repertory and trunk group keys is displayed on
five memory pages. Up to 10 destinations are shown on the first four
pages and two on the last page.

Interrogating all stored destinations

Prerequisite: the terminal is idle or in call state.
Press Program menu.
Press 3.
The repertory numbers stored appear in memory layout.
Memory lines
REPERTORY/TRUNK GROUP KEYS
1 111123 (destination)
2 222123 (destination)
to
0 222222 (destination)
If there are more than 10 call numbers saved:
press * to scroll forwards, or
press # to scroll backwards.
Programming repertory keys or trunk group keys
or
.
Line 6 Line 7 Line 8 Line 9 Line 0
Name Name Name Name Name
Name Name Name Name Name
Name Name Name Name Name
Name Name Name Name Name
Page 1 +
Page 2 +
Page 3 +
Page 4 +
(last page)
Page 5 –
1+
37