Sony HDW-700A Maintenance Manual page 73

" " means items which will be displayed as 0.
" " means that the values stored will be continue to be displayed even after they have been stored.
The " (+REF)" in the scene file column means the value added from the reference file is stored.
"_" indicates items which do not change.
"REF" indicates the value stored in the reference file is returned. "REF + LENS" means that the LENS
file value is also added. "ND" means that the ND OFFSET is also added.
"ON" "OFF" means that the value indicated will always be set.
The standard "(0)" means that the display becomes 0 during standard calling.
(*1): When the electromotive filter option is used
(*2): The fan mode becomes AT (NORM) only when the power is turned off by setting the previous
fan mode to OFF.
(*3): Follows the position of the front/side switch on the camera.
(*4): ON/OFF follows the position of the switch setting on VF.
(*5): Master items are separated into R, G, and B, stored and become 0 after storing.
(*6): Detail limits are separated into the detail white limit and black limit, stored, and become 0 after
storing.
(*7): The black set paint is cleared to 0 by storing.
(*8): A value is set for each iris window pattern. When the window is switch, the values are switched.
(*9): Cleared to 0 when the preset of the operator file is called.
(*10): The value stored in the reference file is reset when the preset of the operator file is called.
(*11): LITHIUM is reset when the preset of the operator file is called.
(*12): OFF is set back when the preset of the operator file is called.
(*13): When the white memory is PRESET, PRSET is cleared when the remote control is connected and
the previous state (A or B) is set.
Since white memories A and B are used for every four CC filters, altogether 8 types of white
memories are available.
(*14):
Setting
VF Screen
indicates the auto iris window frame.
HDW-700AE MMP1
1 2
5-8. File Items (After IF Board ROM Version 2.00 and Higher)
3 4 5
5-15