Pioneer PRA-BD11 Service Manual page 49

5
3. Operational status indication of each block by the LEDs for checking operations
After having indicated the firmware version for 10 seconds, the LEDs for checking operations indicate the operational
status of each block. If there is no problem, LED1 to LED6 are all lit.
During Test mode:
LED 1: Blinks (repeatedly on and off for about 1 second)
LEDs 2-6: Lit.
• The blocks corresponding to each LED are as follows:
LED1 For status indication of the FFC cable connecting with AVIB.
LED2 For status indication of the configuration of IC8610 and IC8611.
LED3 For status indication of IC8611.
LED4 For status indication of IC8614.
LED5 For status indication of IC8613.
LED6 For status indication of IC8617.
5
6
PRA-BD11
6
7
7
8
A
B
C
D
E
F
49
8