Philips Norelco Tripleheader 9000 Series Manual page 28

28
English
Using the Quick Clean Pod
5 Place the Quick Clean Pod Cartridge into
the Quick Clean Pod.
6 Put the top of the Quick Clean Pod back
onto the base and turn it clockwise until
you hear a click.
Do not tilt the Quick Clean Pod to prevent
leakage.
Note: If you use the shaver with shaving foam,
shaving gel or pre-shave products, thoroughly
rinse the shaving heads before you use the
Quick Clean Pod (see 'How do I clean my
shaver?').
Always shake excess water off the shaver
before you place it in the Quick Clean Pod.
1 Place the shaver upside down into the
Quick Clean Pod. The shaver automatically
detects that it is in the Quick Clean Pod.
2 Switch on the shaver to start the cleaning
program.