Philips Norelco Tripleheader 9000 Series Manual page 17

Charging in the charging stand
2 Insert the small plug into the product and
put the power plug in the wall outlet.
- While the product is in quick charge
mode, the lights of the battery status
indicator light up one after the other.
After approximately 5 minutes, the
bottom light of the battery status
indicator flashes. The battery now
contains enough energy for one full
shave.
- While the product charges, first the
bottom light of the battery status
indicator flashes and then lights up
continuously. Next the second light
flashes and then lights up continuously,
and so on until the product is fully
charged.
- When the product is fully charged, all
three battery status indicator lights light
up continuously. After approx. 30
minutes, the light goes out automatically.
3 After charging, remove the power plug from
the power outlet and pull the small plug out
of the product.
1 Make sure that the product is switched off.
2 Put the small plug in the charging stand and
put the power cord in the power outlet.
3 Put the product in the charging stand.
17
English