Craftsman G10-0R7G-2SB Manual page 99

setting the Code F7.05 and F7.06 should To convert binary into hexadecimal,than enter
the Code.
Code
F7.07
Actual mechanical speed=120*output frequency*P7.09/Number of poles of motor.This
parameter is used to calibrate the bias between actual mechanical speed and rotation
speed,Has no effect on the actual speed.
Code
F7.08
F7.09
F7.10
F7.11
Note: Above parameters are read only.
Rectify module temperature:Indicates the temperature of rectify module Overheat
protection point of different model may be different.
IGBT module temperature:Indicates the temperature of IGBT module Overheat
protection point of different model may be different.
Software version:Indicates current software version of DSP.
Code
F7.12
Above Inverter rated power are read only.
Code
F7.13
Accumulated running time:Displays accumulated running time of inverter.
Code
F7.14
0:Before the compensation
Name
Coefficient rotation speed
Name
Rectifier module temperature
IGBT module temperature
MCU software version 1
MCU software version 2
Name
Inverter rated power
Name
Accumulated running time
Name
Running frequency display
99
Setting Range
0.1ÿ^999.9%0 100.0%0
Setting Range
0ÿ^200.0! 0 --0
0ÿ^200.0! 0 --0
1.00ÿ^10.000 --0
0.00ÿ^99.990 --0
Setting Range
0.4ÿ^900.0KW0 Depend on
model0
Setting Range
0ÿ^65535h0 --0
Setting Range
0ÿ^10 00