LG STB-3000 Setup Manual page 44

Cloning Procedures (Cont.)
(Continued from previous page)
STB MANAGER
USB Download Menu
Diagnostics Menu
7. In the Learn From STB (TLX) screen:
• If more than one USB memory device is currently connected to the STB, be sure to select the
USB device on which you wish to save the TLX file. If necessary, use the Up/Down arrow keys
on the Installer Remote to select/highlight the Select USB Memory Device field and press
OK. Then, use the arrow keys to select the appropriate USB device from the drop-down list.
• Next, modify the filename, as required. While the STB model element of the filename may
not be changed, you can differentiate this TLX file from others by changing the last five digits
of the filename. Use the arrow keys on the Installer Remote to select/highlight either the left
(<) or right (>) arrow in the filename field, and press OK until the desired number is shown.
LEARN FROM STB (TLX)
STB MANAGER
Select USB Memory Device
ˇ
USB Device 1: Device Name
Select the filename, and then select OK below.
< >
STB-3000-UA00001.TLX
OK
8. When you are ready to initiate Learning, use the arrow keys to select OK on the screen, and
then press OK on the Installer Remote.
44
Ez Download
Update STB Software
Update PTC Software
Teach To STB (TLX)
Learn From STB (TLX)
CANCEL
BACK CANCEL
(Continued on next page)
206-4272