Ip Addrs; Ethernet Addrs - Motorola SE-1010 Product Manual

IP Addrs

The IP Addrs option has three editable values: IP Address, SubnetMask, and Gateway IP. To
view a specific value, go to the Control menu, use the arrow buttons to place the cursor (>) in
front of IP Addrs, and press ENTER. Now use the right and left arrow buttons to display the
value. To change a value, move the cursor to the desired location and use the up and down
arrow buttons to change each digit. After changing the values, press ENTER to return the
cursor to the Menu Line.
IP Address
The following diagram shows an example IP address:
•
Subnet Mask
The following diagram shows the default Subnet Mask:
•
Gateway IP
The following diagram shows the default Gateway IP:
•

Ethernet Addrs

To view the Ethernet address [also known as the Media Access Controller (MAC) address],
go to the Control menu and press the right arrow ( > ) button until the pointer is in front of
Ethernet Addrs. The following diagram shows an example Ethernet address:
•
< > E
Important: The Ethernet address is read-only, set at the factory, and cannot be changed.
Document Number: 504834-001
C o n t r o l > I P
< > E I P A d d r e s s : 1 6 8 . 0 8 4 . 0 4 4 . 0 8 8
C o n t r o l > I P
< > E S u b n e t M a s k : 2 5 5 . 2 5 5 . 2 5 5 . 0 0 0
C o n t r o l > I P
< > E G a t e w a y I P : 0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
C o n t r o l I P
E t h e r n e t A d d r e s s: 0 0 0 0 0 0 0 0 2 0 0 5
A d d r s E t h e r n e t
A d d r s E t h e r n e t
A d d r s E t h e r n e t
A d d r s > E t h e r n e t
A d d r s
S u b n e t M a
A d d r s
G a t e w a y
A d d r s
A d d r s
23