Table of Contents
Advertisement
Menu Description
The LCD screen's top line is named the Menu Line and it displays all the menu options. The
bottom line is named the Edit Line and it displays the navigational legend and all encoder
options. Each of the nine menus has a Menu Line and Edit Line.
The Preset menu has the following eight options:
Preset
Because this menu has more options than the LCD screen can display at one time, press the
left and right arrow buttons to see the other options.
•
Note: "Preset" is the name of this menu, so the word "Preset" does not scroll. Only the
options scroll.
Selecting an Option
Use the left and right arrow buttons to move the pointer to Audio1 option.
•
Note: Always verify that the pointer (>) appears at the left of the option. To assist the reader
to see the selected area, this manual shows a box around the selected option as shown above.
Editing an Option
To edit an option
1. Navigate to the desired option on the Menu Line and press the ENTER button.
2. Go to the Std option. To move the cursor right and left, press the left and right arrow
3. To change the setting to MP2, use the up and down arrow buttons.
4. To confirm the change and return the pointer to the Menu Line, press the ENTER button.
Document Number: 504834-001
Name
Video
P r e s e t
A u d i o 1
< >
1
V : 0 0 3 2
P r e s e t
N a m e
< >
1
S t d : A C 3
A blinking cursor appears on the Edit Line.
buttons.
The diagram below shows the Preset menu with Audio1 selected and Std is set to MP2.
•
P r e s e t
N a m e
< >
1 > S t d : M P 2
Audio1
Audio2
VBI
A u d i o 2
V B I
A 1 : 0 0 3 3
A 2 : 0 0 3 4
V i d e o
> A u d i o 1
M o d e : A N
S t e r e o
V i d e o
> A u d i o 1
M o d e : A N
S t e r e o
PID
PGM
> P I D
P M T : 0 0 3 5
A u d i o 2
R a t e : 1 9 2
A u d i o 2
R a t e : 1 9 2
7
Advertisement
Table of Contents
