Software Upgrade Image Check; Software Download Progress Indicator - Motorola PTP 300 series User Manual

Web Page Reference
The unit being upgraded will now display information about the build it currently has stored in
the image bank and the one that's just been uploaded. If the image is not the right one, the user
has the option to go back and reload a new image. (See Figure 54)
Figure 54 Software Upgrade Image Check
The user should ensure that the correct image is shown before pressing the "Program Software
Image into Non-Volatile Memory" button. Once this button has been pressed the image is stored
into non-volatile memory, this process can take up to 60 seconds and must not be interrupted.
If the upgrade process is interrupted during the erasure of the image bank, or during the repro-
gramming of the image bank, the image bank will be left in a corrupt state. If this occurs the
software must be reloaded. All software images that are stored in non-volatile memory are pro-
tected via the use of CRCs. If the software detects an invalid CRC the image bank is marked as
'corrupt' and the 300 Series bridge boot code will boot the fixed software image. If this occurs the
user must attempt to reload the correct version of software.
During the write process the progress of the upgrade is displayed on the progress tracking page
(Figure 55). The upgrade process should not be interrupted. Interruption of this process can
result in a corrupt main software image, which will result in the recovery image been booted at
the next reset cycle.
Figure 55 Software Download Progress Indicator
95