Siemens 6SN1123-1AA00-0DA2 Configuration Manual page 86

11.05
05.01
1–axis version
High Performance
M3/0.8 Nm
0.5 Nm
DAC assignment
DAC 1 DAC 2
DAC 3 Ground
Fig. 4-1 Digital control High Performance and High Standard with direct measuring system
Notice
When using non–PELV circuits at terminals AS1, AS2, connectors must be
coded to prevent the connectors being incorrectly inserted (refer to
EN60204–1, Section 6.4).
For Order No. for coded connectors, refer to Catalog NC 60.
© Siemens AG 2012 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 02/2012 Edition
4.1 Closed–loop control with digital setpoint interface
2–axis version
High Performance/High Standard
M3/0.8 Nm
0.5 Nm
DAC assignment
DAC 1 DAC 2
DAC 3 Ground
M3/0.8 Nm
4 Control Units
4-85
4