Table of Contents
Advertisement
Note
When adjusting the picture position, do not touch the lens unit,
otherwise your fingers may be pinched by the moving parts.
To adjust the horizontal position
Press </,.
The picture projected on the screen moves right or left by
a maximum of 31% of the screen width from the center of
the lens.
Top view
31%
1 screen width
: Picture position when moving the
picture to the left at maximum
: Picture position when moving the
picture to the right at maximum
To adjust the vertical position
Press M/m.
The picture projected on the screen moves up or down by
a maximum of 80% of the screen height from the center of
the lens.
Side view
80%
1 screen
height
80%
: Picture position when moving the
picture upward at maximum
: Picture position when moving the
picture downward at maximum
31%
8
Note
The range to move the picture projected on the screen can be
adjusted only within the octagon area illustrated below. For details,
see "Projection Distance and Lens Shift Range" (page 46).
Range of movement of the projected picture
0.8V
0.31H
Projected Picture
0.8V
H: Width of the projected picture
V: Height of the projected picture
To adjust the tilt of the installation surface
If the unit is installed on an uneven surface, use the feet
(adjustable) to keep the unit level.
Feet (adjustable)
Notes
• If the unit is tilted up or down, the projected image may be
trapezoidal.
• Be careful not to catch your finger when turning the feet
(adjustable).
0.31H
Turn to
adjust.
Advertisement
Table of Contents
