Connecting To A Computer - Sony VPL-VW5000 Operating Instructions Manual

Connecting to a Computer

Right side of the unit
: Video signal flow
Notes
• Use a high-speed HDMI cable. With a standard HDMI cable, images of 1080p, DeepColor, 3D video and 4K video may not be displayed
properly.
• When connecting an HDMI cable to the unit, make sure the V mark on the upper part of the HDMI input of the unit and the v mark on the
connector of the cable are faced at each other.
• If the picture from equipment connected to the unit with an HDMI cable is not correct, check the settings of the connected equipment.
• If you set your computer, such as a notebook type, to output the signal to both computer's display and this equipment, the picture of the
equipment may not appear properly. Set your computer to output the signal to only the external monitor. For details, refer to the computer's
operating instructions supplied with your computer. For settings of the computer, consult with the manufacturer of the computer.
HDMI cable (not supplied)
Use a high-speed HDMI cable on which the cable type logo is specified.
(Sony products are recommended.)
11
Computer
to monitor output