Table of Contents
Advertisement
Screen Menu
You can set the picture size, aspect mode, etc.
Note
These items may not be available, depending on the type of input signal. For details, see "Input Signals and Adjustment/Setting Items"
(page 43).
Item names in brackets represent those printed on the remote control.
Setting items
Picture Position
[POSITION]
Description
You can store up to five combinations of lens settings, aspect ratio, and blanking.
After setting the lens, aspect, and blanking, select from "1.85:1," "2.35:1," "Custom 1," "Custom 2," or
"Custom 3" depending on the subtended screen angle, and after confirming, continue by selecting
"Save," "Delete," or "Select."
Save: Stores the current lens settings (focus, window size, window position) in the selected position. If a
setting is already stored in that position, it is overwritten.
Delete: Deletes the stored setting. After the setting is deleted, "1.85:1," "2.35:1," "Custom 1," "Custom
2," or "Custom 3" in the display change to "---."
Select: Recalls the settings of the selected position.
Tip
The optimal aspect ratio is preset for each picture position. The aspect ratio can be changed and saved
for each picture position.
Notes
• After you have selected and confirmed the lens position, the lens starts to move. Do not touch the lens
and the area around the lens, otherwise it may cause injury or a malfunction.
• If you press any button on the remote control or the unit while the lens is moving, the lens stops. In
this case, select the lens position again or adjust the lens manually.
• When you use a 2.35:1 or a 16:9 subtended angle with the Picture Position function, make sure that
the installation position is suitable (page 13).
• The Picture Position function is not guaranteed to reproduce the lens settings precisely.
24
Advertisement
Table of Contents
