Connecting To Video Equipment Or A Computer; Connecting To A Vcr - Sony VPL-VW5000 Operating Instructions Manual

Connecting to Video Equipment or a Computer

You can enjoy high picture quality by connecting a DVD player/recorder, Blu-ray Disc player/recorder, or PlayStation
equipped with HDMI output to the HDMI input of the unit.
When making connections, be sure to do the following:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality. When
pulling out a cable, be sure to pull it out from the plug, not the cable itself.
• Refer to the operating instructions of the connected equipment.

Connecting to a VCR

Right side of the unit
: Video signal flow
Notes
• Use a high-speed HDMI cable. With a standard HDMI cable, images of 1080p, DeepColor, 3D video and 4K video may not be displayed
properly.
• When connecting an HDMI cable to the unit, make sure the V mark on the upper part of the HDMI input of the unit and the v mark on the
connector of the cable are faced at each other.
• If the picture from equipment connected to the unit with an HDMI cable is not correct, check the settings of the connected equipment.
HDMI cable (not supplied)
Use a high speed HDMI cable on which the cable type logo is specified.
(Sony products are recommended.)
Equipment with HDMI output connectors
10
AV amplifier Speakers
to HDMI output
®