Phone Screen - Bosch AIVIH61L2 Manual

— Your cellular phone is locked in
order to prevent dialing.
. When the radio wave condition is not
ideal or ambient sound is too loud, it
may be difficult to hear the other
person's voice during a call.
. Immediately after the ignition switch is
placed in the ACC or ON position, it
may not be possible to receive a call
for a short period of time.
. Do not place the cellular phone in an
area surrounded by metal or far away
from the in-vehicle phone module to
prevent tone quality degradation and
wireless connection disruption.
. While a cellular phone is connected
through the Bluetooth® wireless con-
nection, the battery power of the
cellular phone may discharge quicker
than usual.
. Some cellular phones or other devices
may cause interference or a buzzing
noise to come from the audio system
speakers. Storing the device in a dif-
ferent location may reduce or elim-
inate the noise.
. Refer to the cellular phone Owner's
Manual regarding the telephone pair-
ing procedure specific to your phone,
battery charging, cellular phone an-
Condition:
tenna, etc.
. The antenna or battery display on the
monitor may not coincide with the
antenna or battery display of some
cellular phones.
. If reception between callers is unclear,
adjusting the incoming or outgoing
call volume may improve the clarity.
"Control buttons and touch
screen display" (page 2-2)
. The microphone is located near the
map light.
. To improve call quality, the micro-
phone is optimized to recognize the
driver's voice. Speech from vehicle
passengers may not be captured by
the Bluetooth® Hands-Free Phone Sys-
tem.
. Keep the interior of the vehicle as quiet
as possible to hear the caller's voice
clearly as well as to minimize echo.
Reduce background noise as much as
possible by closing windows and
pointing HVAC vents away from the
ceiling.
[ Edit: 2019/ 9/ 13 Model: 2020MY AIVI ST3 OM_N20E-AV1NJU0_NAVIOM19-022 ]
(55,1)
4. Hands-Free Phone

PHONE SCREEN

The phone screen can be displayed by
touching [Phone] on the Launch Bar,
pushing < > on the steering wheel or
pushing < > (if so equipped) on the
control panel.
4-3