Route Calculation - Bosch AIVIH61L2 Manual

6. Navigation (if so equipped)
INFO:
. The vehicle icon may be misaligned
when starting the vehicle just after
starting the engine or the hybrid
system.
. The vehicle icon may also be misa-
ligned if different sized tires or tire
chains are installed.
. The system has a function that auto-
matically corrects the vehicle icon
position when it is misaligned from
the actual position.
. Vehicle position correction by GNSS
may not function when the vehicle is
stopped.
. If the vehicle icon position does not
return to normal even after driving for
a while, correct the vehicle icon posi-
tion manually.
Detailed Map Coverage Areas
(MCA) for navigation system
This system is designed to help guiding to
the destination, and it also performs other
functions as outlined in this manual.
However, the system must be used safely
and properly. Information concerning
road conditions, traffic signs and the
availability of services may not always be
6-52
Condition:
up-to-date. The system is not a substitute
for safe, proper and legal driving.
Map data covers select metropolitan
areas.
Map data includes two types of areas:
"Detailed coverage areas" providing all
detailed road data and other areas show-
ing "Main roads only".
INFO:
Detailed map data is not available in many
areas and is generally limited to select
major metropolitan areas.

ROUTE CALCULATION

. The suggested route may not be the
shortest, nor are other circumstances
such as traffic jams considered.
. Because of the inevitable difference in
road conditions and circumstances
between the time you use this system
and the time the information was
produced for the map data, there
may be discrepancies in roads and
regulations. In such cases, actual road
conditions and regulations take pre-
cedence over map data information.
. During route calculation, the map will
not scroll, however the vehicle icon will
move according to the actual vehicle's
[ Edit: 2019/ 9/ 13 Model: 2020MY AIVI ST3 OM_N20E-AV1NJU0_NAVIOM19-022 ]
(158,1)
movement.
. During route calculation, buttons such
as <MAP> and <MENU> will be
disabled.
. In some cases, after the calculation is
complete, the calculated route may
not be immediately displayed.
. Waypoints that have been passed will
be disregarded by rerouting calcula-
tion.
. If you scroll the map while the sug-
gested route is being drawn, it may
take more time to finish drawing.
. Route calculation may not be com-
pleted in the following cases.
— If there is no main road within a
range of 2.5 km (1.5 miles) from the
vehicle, a message saying so will
appear on the screen. Try recalcu-
lating when the vehicle is closer to a
main road.
— If there is no main road within a
range of 2.5 km (1.5 miles) from the
destination or waypoint, a message
saying so will appear on the screen.
Try setting the location closer to a
main road.