Bosch AIVIH61L2 Manual page 165

INFO:
To exit the Voice Recognition System,
push and hold < > on the steering
wheel or <BACK> on the control panel.
Operating tips
. Speak a command after the tone.
. Some commands are only for English.
. If the command is not recognized, the
system will prompt you to speak the
command again. Repeat the com-
mand in a clear voice.
. Touch [ ] on the touch screen dis-
play to return to the previous screen.
. To adjust the volume of the system
feedback, push < > on the steering
wheel or turn <VOL/PUSH POWER>
while the system is making an
announcement.
. When setting a destination for route
guidance with some search methods,
such as POI, Intersection or City Center
search, the search area is automati-
cally set to the state/province where
your vehicle is located. Change state/
province to change the search area to
another state/province if necessary.
Condition:
Voice Prompt Interrupt:
In most cases, you can interrupt the voice
feedback to speak the next command by
pushing < > on the steering wheel. After
interrupting the system, wait for a tone
before speaking your command.
One Shot Call:
To use the system faster when making a
call, you may speak the second level
command skipping speaking the first level
command. For example, push <
say "Redial" after the tone without first
saying "Phone".
How to see voice command
screen
1. Push < > to display the first screen
of the voice command list.
2. Speak a command or select an item on
the voice command list. The Second
screen is displayed.
3. Speak a command or select an item on
the voice command list. The command
is executed or the next screen for
further command is displayed.
4. Follow the prompts to complete the
commands.
[ Edit: 2019/ 9/ 13 Model: 2020MY AIVI ST3 OM_N20E-AV1NJU0_NAVIOM19-022 ]
(167,1)
7. Voice recognition
Voice command screens:
> and
Example
Shows a list of available categories.
Speak a category command or touch
the key of the corresponding cate-
gory.
Touch [Settings] or say "Settings" to
display the system voice settings.
Shows a list of available commands
for the selected category. Speak a
preferred command.
Touch [Help] or say "Help" to hear help
announcements on how to use the
system.
7-3