Table of Contents
Advertisement
Bosch Motorsport
1.
To set up a new car, select 'Add Car'.
2.
In the Car settings tab, enter a name for the new vehicle.
This name will be used as a part of the file name for WDServer's log of received tele-
metry data and will show up in WinDarab, when searching for the telemetry stream in
the Network folder.
You are now at the final step of configuring the telemetry stream. In order for the
data to be decrypted by WDServer, two *.ini files must be referenced by WDServer.
After the configuration is sent to the logger, these two different *.ini files will be cre-
ated in the base folder. You can find the base WDServer folder, if you right-click the
Telemetry and select 'Properties'. You can change this folder location for easier access
if desired.
3.
Define the link to the folder of the *.ini files for each car or define it in the general
WDServer settings, under the 'Telemetry' tab.
Manual_C_80
Telemetry System LTE 65 | 15
97 / 144
Advertisement
Table of Contents
